How do I use Bathroom & Shower Cleaner?Updated 11 days ago

Spray Bathroom and Shower Cleaner directly onto the surface. Spread the foam evenly with a damp cloth or mitt so the formula has full surface contact. Let it sit for a few minutes, up to 10 minutes for heavy soap scum or limescale build-up, to break down dirt, soap scum and body oils. Scrub any remaining grime with the Ultra Pro Bathroom Mitt, then rinse clean with water. More dwell time means less scrubbing. For weekly maintenance you can skip the scrub: spray, wait, wipe.

A few minutes for everyday maintenance cleaning. For heavier soap scum, limescale, or a bathroom that has not been cleaned in a while, leave the foam on for up to 10 minutes. Do not let it dry out fully; re-spray if needed. Longer dwell time gives the formula more time to break down grime, so you scrub less. Roughly 2 to 3 minutes for weekly maintenance, around 5 minutes for moderate soap scum, and up to 10 minutes for heavy build-up.

Bathroom and Shower Cleaner has a relatively neutral pH of 8, which makes it compatible with most surfaces commonly found in bathrooms. It is especially effective on tiles and glass. It also suits bathtubs, basins, taps, shower trays, fibreglass, acrylic, stainless steel, chrome and glazed ceramic. For unique or delicate materials, always spot test first in an inconspicuous area to check compatibility and avoid surface damage.

Once a week for maintenance cleaning prevents build-up and keeps the bathroom consistently fresh. For shower screens specifically, a quick spray and wipe after use stops soap scum from ever hardening in the first place. In an average home, one 1.8L pack lasts around six months.

Bathroom & Shower Cleaner

Twelve ingredients, gentle pH 8, made in Australia. Dermatest tested and Sensitive Choice approved.

New to Koh?

The Bathroom & Shower Starter Kit pairs the cleaner with the Ultra Pro Bathroom Mitt so you have the full method in one go.