How do I use Ultra Pro Bathroom Mitt?Updated 4 hours ago

Two methods, both work. Option 1: spray Bathroom and Shower Cleaner onto the fluffy lather side (the block-colour side), work it into a foam with small circular motions, then flip to the striped side to scrub. Better for taps, glass and tiles. Option 2: spray Bathroom and Shower Cleaner directly onto the surface and scrub with the striped side. Better for tough grime, soap scum, corners and grout. To put the mitt on, slip your hand inside and split your fingers however feels comfortable. An internal stitch helps hold your hand in place, and we suggest thumb and index finger on one side with the remaining fingers on the other. The elasticated cuff keeps it snug and the 4 mm water-resistant PU foam lining keeps your hand dry.

Four steps. Let Bathroom and Shower Cleaner dwell on the surface for a few minutes so the formula can break down soap scum and grime. Rinse thoroughly with a spray or shower head until the water runs clear. Squeegee glass and tiles to take off the bulk of the water. Buff away any remaining moisture with a dry Ultra Pro Cloth for a streak-free finish. The dwell step is the one most people skip, and it is the step that does the heavy lifting.

After each use, rinse the mitt under warm water until the water runs clear, squeeze gently without twisting, and hang it to air-dry somewhere ventilated rather than a damp cupboard. For machine washing, run a cool cycle with a mild liquid detergent free of dyes, fragrances, bleach and softeners. No bleach, no fabric softener, no iron and no high-heat drying. Wash with non-linting items only, never cotton, because cotton sheds fibres that clog the microfibre loops. Wash it separately on the first cycle, as some dye may run.

Check three things. Dampen the mitt under warm water before you apply product, since dry microfibre does not lather well. Use the fluffy block-colour side to lather rather than the striped side. Apply enough Bathroom and Shower Cleaner directly onto the mitt. If the surface is coming up streaky, rinse it fully before you buff, and ease off the amount of cleaner, because a little goes a long way with absorbent fibres. If the mitt is too wet to buff the surface dry, finish with a dry Ultra Pro Cloth.

Ultra Pro Bathroom Mitt

Dual-sided microfibre and scrub mitt with a glove-style fit and water-resistant lining. Pairs with Bathroom & Shower Cleaner, Bathroom Squeegee and Ultra Pro Cloth.

Bathroom & Shower Cleaner

The fragrance-free foaming cleaner Ultra Pro Bathroom Mitt is designed to lather up. Sensitive Choice approved and made in Australia.