Grout Brush
How to use: Grout Brush
Spray Universal Cleaner on the grout lines, hold the brush at an angle, then scrub with the long-bristle side and switch to the short side for corners and edges. Use light pressure on silicone sealant. →
Grout Brush Pole Assembly | How to put together
Line up the base of Grout Brush with the end of Grout Brush Pole and push until it clicks. Unclip the release to take it off again. No tools needed. →
Which products are compatible with Grout Brush?
Universal Cleaner for everyday grout, Bathroom and Shower Cleaner for soap scum, Kitchen Grease and Oil Cleaner for grease. It also clips onto Grout Brush Pole. →
How do I clean and store Grout Brush?
Rinse the bristles in warm water after each use, squeeze gently, then air-dry bristles-up. Store somewhere dry and shaded, away from direct sun and high heat. Do not soak. →
How long will Grout Brush last?
Around 100 metres of stone-based grout lines under normal pressure. Replace it when the bristles stay splayed, strokes feel soft, or residue stays behind in the grout line. →
What is Grout Brush and Pole made of and can I recycle it?
Polypropylene handle, polybutylene terephthalate bristles, and a PP grip with a stainless steel shaft on the Pole. Mixed materials, so check your council before recycling. →
How do I lock Grout Brush Pole?
Extend the pole to your preferred length, then twist the grey and green sections in opposite directions until they tighten. The small green collar is a spacer, not the lock. →